The T2 Carbon Handset features a high-quality receiver and T2 Carbon microphone. The handset is constructed of durable ABS plastic combined with a high strength stainless cord and steel lanyard. Available in 32" (standard) and 18" or 52" (optional) cord
lengths. Ideal for use with most Carbon compatible applications.
Each handset consist of the following elements:
- Handset type: Standard Receiver and T2 Carbon Transmitter
- Handset handle and cap material: ABS
- Wiring: Four 24 gauge Teflon insulated wires (2 for receiver, 2 for
transmitter), with 4 spade conductors
(Optional single modular plug by request, $3.00 per unit extra)
- Armored Cord Assembly.: 304 Stainless Steel, Interlock style. Inside Diameter,
0.250", 6.350mm. Outside Diameter, 0.329", 8.357mm. Linear Pull Test Load, 1000
lbs., 454 kg
- Includes steel lanyard which is anchored to handset handle. Steel lanyard has a pull test load of approx. 550 lbs, 250 kgs.
- Available Cord Lengths: 32" (standard), 18" or 52" (optional)
- Other Components: lanyard block retainer; anti-rotation wedge; transmitter
holder; blue rubber grommet to seal handset/cord connection
Standard Receiver:
- DC Resistance at 20 degress C : 145 ± 15 ohm
- Frequency Response Range: 300-3400 Hz
- Sensitivity: 100 ± 2 dB at 60mv
- Impedance: 150 ± 30 ohm at 1 KHz
T2 Carbon Transmitter:
- Type : High Quality BT-T2 Carbon Granule
- Response Range: 300-4500 Hz
- TOLR: -40.5 ± 5 dB (15kft RS-470)
- Moveable Resistance: 35-95 ohm at 50mA D.C.(RS470)
- Self Generated Noise: Less than 15 dB RNC
Custom colors, cord lengths, microphones and wire terminal/plugs are available depending on details and volume. Call
1-800-884-4835 or fill out the contact us form to inquire about custom handsets or volume quotes.
Master Case Qty: 30 pcs
Handset caps are sealed with high-strength epoxy adhesive prior to shipping, unless otherwise requested.
Products
Support
